120 young researchers from 12 countries visited the Technion for a unique workshop on electron microscopy.
The electron microscopy workshop attracted young people from all the universities in Israel and from 11 European countries.
The 4-day workshop was attended by some 120 young researchers, the largest group ever at this type of workshop. Participants heard lectures by scientists from the Technion and other Israeli universities and toured the Technion’s world-class microscopy centers.
Prof. Dganit Danino
Prof. Dganit Danino earned her B.Sc., M.Sc. and Ph.D. in chemical engineering at the Technion and in 2002, following post-doctoral work at NIH in the U.S., she returned to the Technion as a senior member of the Faculty of Biotechnology and Food Engineering. Prof. Danino is an expert in electron microscopy at low temperatures (CryoEM) engaged in both the development and education of CryoEM methodologies. Her research involves the development of drug delivery systems and unraveling of soft matter self-assembly mechanisms.
“The Technion is a leading research institute in the development of applications and electron microscopy methods at room temperature and at low temperatures. Many researchers from around the world come here to work on joint projects and to learn the unique methods developed here. As academic educators, it is important for us to share technologies and innovativeness with the younger generation, too. We made a principle decision not to charge for participation in the workshop, in order to ensure that young people would not be deterred from participating for budgetary reasons, and our decision proved correct – within just two weeks over 100 young researchers had registered, and they participated in all the workshop’s activities. Universities throughout Israel also supported the workshop and life sciences students at Weizmann Institute, for example, received academic credit for participating.”
The two robots built by Ph.D. student Jonathan Spitz of the Technion’s Faculty of Mechanical Engineering are climbing over obstacles and up and down slopes
Jonathan Spitz and his robots
In the begining there was Billy – a blue robot 10 cm high and 15 cm long. At the end of his ‘gestation’ – a month of planning, printing, programming, wiring electronics and correcting defects – he began to walk and clamber over obstacles. He was soon joined by his fellow green robot, Charlie. The two wander all over campus guided by Jonathan Spitz, their ‘father,’ who maneuvers them using his smartphone. They are capable of traversing rough terrain such as rocks, sand and steep slopes.
Spitz, a Ph.D. student at the Faculty of Mechanical Engineering, was born in Argentina and came to Israel following high school, to the Atid program. “This decision was a combination of Zionism, which I absorbed at home and in a youth movement, and the desire to study at the Technion. The Technion is a very famous institution among Jews in Argentina, and many teens want to come to Israel to study here.”
Thirteen years have passed since Jonathan landed in Israel, and he remembers that day very well. “I left Argentina on December 23, 2002, on a 20-hour flight that landed at Ben Gurion Airport at 3:00 in the morning. From there I went to an absorption center in Kfar Sava.” In June 2003 Jonathan completed a Hebrew language study program and in October began his studies at the Technion. After earning a B.Sc. in mechanical engineering, he enrolled in the M.Sc. program and in 2012 started his Ph.D. studies, which he hopes to complete soon. “The Technion is very close to my heart,” he says. “There are students who count the days until they finish their degree, but I am actually enjoying myself. I didn’t stay here for three degrees in a row without good reason.”
Jonathan Spitz and his robots
Jonathan is conducting his Ph.D. research in the SMILE lab at the Faculty of Mechanical Engineering, under the guidance of Miriam Zacksenhouse. “Today we have means at our disposal that were not available only a few years ago: tremendous computing power and 3D printers,” explains Jonathan. “True, mechanical design is still the same complicated task, but 3D printing lets you create very complex structures ‘at home’ at very low cost. Each of the robots I made cost me about $200. That’s all.”
Jonathan developed Billy and Charlie during his spare time (“They’re not part of my Ph.D.”) in order to prove the feasibility of building sophisticated mobile robots. Jonathan promoted the use of 3D printers in his lab in order to create ambulatory robots that would demonstrate the control methods he designed. He developed the robot’s gait based on his observation of nature. “Human beings walk from age one or two, such that to them walking seems to be the simplest of actions – at least on level surfaces. Humans only have to concentrate on their steps on difficult terrain. The controller that I developed also works without any need for feedback on smooth, horizontal surfaces, and when the robots walk on slopes it uses minimal feedback.” In order to make his robots walk, Jonathan built a ‘genetic algorithm’ – an algorithm that evolves better controllers following the principles of natural selection.
“My success is in building robots with high navigability; that are inexpensive and which can therefore also be built as ‘swarms’ of robots for various security uses and for assisting and treating people who are ill. The control method that I designed (and which has been patented) can be applied to both humanoid robots and medical robots (such as ReWalk) and robots for walking rehabilitation. In order to put this idea into practice and make it commercially viable, I have entered the BizTEC competition and applied to the Runway program at Cornell-Technology.”
“Creativity is intelligence having fun”. This insight, attributed to Albert Einstein, describes perfectly the Rube Goldberg Passover video that we and our students have made for you to enjoy. The youthful energy and ingenuity –the joie de vivre – that burst from this video, are what the Technion is all about.Enjoy!
Technion and TU Berlin to hold a special symposium on the topic of green photonics
The symposium will mark 50 years of diplomatic relations between Israel and Germany
On March 30th and 31st, 2015, the Technical University of Berlin (TU Berlin) and the Technion will hold a joint two-day symposium on the topic of ‘Green Photonics’. The conference, which will be held at TU Berlin, will focus on problems arising from the dramatic increase in Internet use and the inability to provide the electrical energy required to support it. A significant part of the conference will be devoted to innovative technologies based on advanced use of photons, and as such pay tribute to the ‘International Year of Light’ declared by the UN, upon which the year 2015 will be dedicated to technologies based on light.
Leading researchers and developers from industrial and government laboratories worldwide will present the latest technologies related to electronic and optoelectronic computing and data communications (towards a ‘green’ web) as well as energy harvesting methods. In the morning session of March 30th, a special ceremony will be held to commemorate 50 years of diplomatic relations between the State of Israel and the Federal Republic of Germany, with participation by key government members of both countries; many decades of collaboration between Technion and TU Berlin (the former TH Charlottenburg) will also be remembered and praised.
At the end of the symposium, both leading technical universities will present an outlook on the joint efforts they are making in the development of novel technologies and applications to serve society in the 21st century. As part of this cooperation, young researchers will be fostered and financially supported.
The 2015 Green Photonics Symposium is organized by the President of TU Berlin, represented by the Center of NanoPhotonics, together with the Technion-Israel Institute of Technology, represented by the Russell Berrie Nanotechnology Institute (RBNI) and the German Technion Society.
Uniforms that function as protective gear and space suits that are both flexible and impervious to micro-meteorites are two of the possible applications for new complex materials developed by the Technion
The various micro-structures (various angles of hard scales and a quantity of the stiff substance) and their reactions to the strength of the penetration; bottom – bending one of the models under pressure, to assess the material’s flexibility
Bulletproof uniforms and space suits impervious to micro-meteorites are two of the potential applications for new materials developed at the Technion Faculty of Aerospace Engineering, states an article in the Soft Matter technology journal. These materials were developed by Assistant Professor Stephan Rudykh, head of Mechanics of Soft Materials Lab. “Flexibility and strength are considered as usually competing properties: as one increases the other decreases. In general, this is true, but in my research I am trying to create materials that will be both flexible and strong (with respect to their penetration resistance).”
Assistant Prof. Stephan Rudykh specializes in creating complex soft materials. He started out as a theorist, but after exposure to the world of 3D printing during his post-doctoral work at Massachusetts Institute of Technology, he started experimenting with various formulas.
“Suddenly I could make the materials that I was designing,” he says, “and then check if their properties match my theoretical projections. Now, too, with these materials, which are flexible and relatively durable against penetration, I can run trials on the models I print.” Rudykh’s research is a joint effort between the Technion and MIT.
Rudykh joined the faculty as an Assistant Professor straight from his post-doctoral studies. His research has already been published in leading journals such as Physical Review Letters and his most recent article was published in Soft Matter.
1. Asst. Prof. Stephan Rudykh. Photo Credit: Miki Koren,The Technion’s Spokesperson’s Office
The inspiration for Rudykh’s development of the new strong and flexible materials comes from fish. “Fish are flexible creatures, but are protected by hard scales. Their ‘secret’ is the combination of the scales and the soft tissue beneath them, and that is what I tried to mimic here. The materials that I am designing are also made of two layers – one soft (the ‘body’) and the other (‘scales’) constitutes the ‘armor’. These two components provide the combined property of protecto-flexibility that we want.”
When asked about possible applications, Rudykh speaks very cautiously. “My job is not to develop applications, but rather to design the material, and my focus at present is the optimization of the material. If, for example, we were talking about army uniforms, or about a space suit against micro-meteorites, then there are areas such as the chest that need hardly any flexibility, and other areas such as the elbow, where flexibility is essential.”
Rudykh stresses that it is extremely challenging to completely counteract the inverse relationship between flexibility and strength, but it is possible to play with the trade-off between them. “I have managed to increase the penetration resistance by a factor of 40, while reducing flexibility by only a factor of 5, and that opens a great many options. Concerning army uniforms or space suits, the idea is to create a tailor-made fabric based on the soldier’s body type and of course the conditions he will be facing. For example, we can think about protection of spacemen against space radiation by incorporating protective materials into the microstructure of the flexible composites.”
The published results are based on quasi static tests on the 3D-printed materials, when materials are loaded relatively slowly. Later, he hopes to do dynamic testing, using fast-moving projectiles such as bullets or small particles – and to examine the results.
Prof. Roy Kishony lectures to outstanding students in China
Prof. Kishony and Chinese students at the Project Prometheous 2015 event at Shantou University, China. Photo Credit: Li Ka Shing Foundation
Prof. Roy Kishony of the Faculty of Biology and Life Sciences & Engineering delivered a lecture on “Mathematics and Big Data in the Life Sciences” to outstanding students in China. The lecture was part of Project Prometheus, which brings together leading scientists from around the world and outstanding science students.
Prof. Kishony’s lecture was part of a three-day event at Shantou University, which hosted lecturers from the Technion, Stanford and Yale Universities, King’s College London and the Max Planck Institute of Germany. The students, who are considered the “China’s scientists of the future and engineers of tomorrow,” heard scientists speak about their research on open questions in science and a career in science, and witnessed some of their passion for science. The event was hosted by the Li Ka Shing Foundation, supported by Ministry of Education and the People’s Government of Guangdong Province, co-organized by the Chinese Society of Education, and Shantou University.
“The Chinese students made a deep impression on me,” said Kishony. “They are very knowledgeable and are full of enthusiasm for science. This was a wonderful experience for me and I learned a lot about the tremendous academic and science potential in China.”
Hundreds of students from the US, Russia, Ukraine, Argentina and Israel participated in the international “RoboTraffic” competition at the Technion
Hundreds of students from some 50 schools in Israel, USA, Argentina, Russia and Ukraine participated in the 2015 RoboTraffic competition held at the Technion last Thursday, March 12. The competition, held consecutively for six years, started out as a national contest that grew to become international.
The RoboTraffic competition is organized by the Leumi Robotics Center at the Technion’s Faculty of Mechanical Engineering, World ORT organization, and the World Zionist Organization in cooperation with the YTEK Foundation and Eytam Robotics Ltd. The overall goal is to provide students with the knowledge and skills of Robotics along with facts and awareness necessary for safe driving, in an attempt to minimize the involvement of young drivers in road accidents. The competition involved small mobile robots, shaped like miniature cars, to simulate road conditions.
“In preparation of the competition, the Leumi Robotics Center developed a ‘safe roads’ route course containing sensors that make contact with the car robots, and provide the vehicle with an automatic response to signaled obstacles as well as traffic lights and road signs,” explained Dr. Evgeny Korchnoy, the director of the Leumi Robotics Center at the Technion. “During the competition, the robots move along the track autonomously, in a manner ensuring the prevention of road accidents and in keeping with traffic rules. As part of the preparation for the contest, students learned about mechanics, programming, control and electronics as well as road safety skills.”
This year, over one thousand students from elementary schools, middle schools and high schools participated in the competition. High school students competed in six different categories: safe driving, racing, knowledge of driving rules, road safety ideas, innovations in robotic car structure, and knowledge acquisition of vehicle structure using the Solidworks drawing software.
Rachel Lubarsky (14 years old) and Leah Baram (aged 15) along with their team Dnepropetrovsk, Ukraine, achieved the best and fastest results and won first place for high school students in the race category and in the use of the drawing software. They came to the competition at the Technion along with two more representatives from their team. The team’s accomplishments throughout the competition were very impressive. “My connection to technology is limited,” confesses Leah, “we study in a Jewish school, part of the Chabad network of schools, and it doesn’t offer any subjects in technology.”
“I take supplementary studies after school at the religious seminary for girls,” added Rachel. “This is where we were first introduced to robotics, and how we became involved in the competition.”
“We feel very comfortable here at the Technion,” they both agreed. “Israelis are very helpful. We’re not sure if we would like to live here in the future, but we’d be very happy to study at the Technion.”
“As part of the exposure of the younger generation to science and technology, the Technion attaches great importance to investing in young students,” said Prof. Moshe Sidi, Vice President of the Technion. “It is heart warming to see such a great number of students from Israel and abroad partaking in this competition here at the Technion – all of whom share a common pursuit – a curiosity and interest in robotics and road safety.”
“Six years ago we held this competition for the first time with only five Israeli schools,” related Prof. Moshe Shoham, Head of the Leumi Robotics Center at the Technion. “Today, dozens of schools from Israel and abroad are competing in this competition. You are the next generation and you will be the ones that will bring Israel to the forefront of international robotics. Your generation will witness the revolution of autonomous transport vehicles and the roads of the future, and it will happen sooner than we think.”
“We are very pleased to bring our schools to Israel to compete in this advanced robotics competition that also teaches safe driving,” said Avi Ganon, the CEO of World ORT KADIMAMADA-ISRAEL. “Technology studies is an effective tool in strengthening the ties between the Diaspora and Israel, and important to Israel’s future.”
The team that won first place in the elementary school competition is from the ‘Future’ program of the Karnei Shomron education district. “We programmed the action of the robot, and added sensors so that it could navigate along the route and adhere to traffic lights,” explained Jonathan Makayten, a sixth grade student. “We take robotics lessons as part of the ‘Future’ excellence program during school hours.”
“This is a very interesting field,” added his fellow team member, Noam Cohen, a fifth grader.
In the various categories of the competition for secondary schools, the students from ORT Binyamina (Israel) and ORT Chernovtsi, ORT Odessa, and ORT Kiev (Ukraine) won first place.
The following schools won various categories in the ‘Mama-Robot’ competition for elementary and middle schools – Ga’ash, Ashalim Rishon Lezion, Misgav elementary school and Yavne group. In the ‘RoboTraffic-Junior’ category, the winning team was from the Amit-Amital School in Netanya.
“Nano-skeletons’ (in red) delivered to human tissue infected by prostate cancer. The infected cells are colored in blue (PIP) and green (cytoplasmic); it is possible to see how the ‘nano-skeletons’ reach them
Florida native Dr. Beth Schoen, is part of a team developing a novel platform for delivering anti-cancerous drugs directly to its mark as part of her postdoctoral research at the Technion
Beth Schoen, born in Hollywood Florida, came to the Technion to conduct her postdoctoral research at age 26. In her very limited spare time she plays soccer for the leading all women’s soccer team – Maccabi Hadera – and studies Hebrew. “The Hebrew thing is no simple matter,” she confesses, “but I’m willing to make the effort, because it’s clear to me that Israel is where I want to live.”
Dr. Beth Schoen completed her undergraduate degree at the University of Florida, and her doctorate at Michigan State University in chemical engineering. “My doctoral studies focused on synthetic organic chemistry, particularly on the development of polymers with unique thermodynamic attributes especially resistant to high temperatures. These types of materials are used in part for the production of jet engine parts, body armor and Nomex (used for making fire-resistant gloves and overalls). One of our tasks was to create soft sheets that were not brittle, to be worn to be both bulletproof and fire resistant. It was a theoretical study, but as part of the process I also produced some of these polymers and tested them.”
Dr. Schoen planned to come to the Technion as part of her doctoral studies, but, she adds, “It didn’t work out, so I started to check where I could best fit in here in my future studies.” She decided to join Prof. Marcelle Machluf’s laboratory, at the Faculty of Biotechnology and Food Engineering, “I was eager to move from chemistry to biology and pursue cancer research in particular. I was very glad for the tremendous opportunity that Marcelle gave me in taking me on – perhaps it was because of my experience in nanomaterials and polymers.”
Prof. Marcelle Machluf’s research team consists of 17 female and 3 males students, researchers and technicians working on two main projects: (1) the development of scaffolds to rehabilitate damaged heart-tissue, and (2) the development of new technology to deliver drug treatment to damaged (sick) tissue (specifically related to cancer therapy). In an interview with her she focused on the second project.
“The current treatment for cancer involves radiotherapy and chemotherapy usually administered through intravenous infusion. The cancer drugs available are extremely effective, yet the way they are put to use in present day treatment, they also cause damage to healthy tissues. These are very potent drugs – they are intended to kill cancer cells – and on their way they also end up killing healthy ones.”
“The greatest damage is caused to rapidly dividing cells, which are similar to cancer cells. Hair follicle cells, for example, are a type of rapidly dividing cells and they damage easily from these types of treatment, which explains the hair loss in patients undergoing chemotherapy. Other side-effects include nausea and hearing loss, sometimes even leading to deafness. The drug Cisplatin for example, is a type of chemo drug used to treat various types of lung and breast cancers; some of its side-effects include damage to renal and immune system functioning, putting patients at risk to infections and diseases.”
These impediments are what fuel Prof. Machluf’s drive to develop a new drug delivery platforms capable of delivering anti-cancer drugs directly to the tumor without damaging healthy tissues on its way. “This is the top priority of cancer treatment: to develop a ‘magic bullet’ that target cancer cells,” explains Prof. Machluf. “And our new platform may be the solution to this great challenge.”
The new platform is based on ‘depleting’ specific cells – mesenchymal stem cells – so that there is nothing left of them save for the membrane. This membrane, called a ghost cells can be down sized to nano-vesicles, termed nano-ghosts, which can be loaded with any drug and delivered by injection directly into the blood stream. The immune system falls for the trap and does not recognize the ‘intruder,’ instead it treats these cells as if they were naturally part of the system and sends them to the afflicted area. On the way to their target they do not release the drug they are carrying and therefore do not do any damage to healthy tissues. Only upon reaching the malignant tissue, which they know how to identify, do they break down and secrete their contents at the site of the tumor cells.
This original idea was tested in a long series of experiments, and the results are very impressive: these nano-ghosts are in fact tumor selective, no matter the type of tumor. They ‘dash’ straight to the malignant tissue without emitting their drug on the way and without damaging healthy cells. Moreover, this unique ‘parcel’ increases the effectiveness of the treatment by ten-fold. Animal studies have shown that the employment of nano-ghosts for anti-cancer drug delivery have led to an 80% delay of prostate cancer – an unprecedented rate.
Still, there is a lot of work ahead, as Prof. Machluf’s research team works on improving the mechanism of this novel new platform: some of them are focusing on compatibility with specific drugs while others, like Dr. Beth Schoen, are concentrating on improving the nano-ghosts “This platform must be very precise,” explains Schoen. “It must be able to endure travelling through the entire human body, and release its contents only inside the tumor.”
Renana Gershoni Poranne, a doctoral student in the Schulich Faculty of Chemistry, explains why she gave up a career in music, why she doesn’t define herself as an “applied scientist,” and why there is no relationship between aromatic substances and air fresheners
This year Renana Gershoni Poranne will be completing her tenth year at the Technion – a decade that began in 2004 with her B.Sc. studies in Molecular Biochemistry and continued with her M.Sc. in Organic Chemistry. She graduated summa cum laude for both degrees and is now studying for her Ph.D. under Prof. Amnon Stanger.
You’re 30 and have already been at the Technion for a decade.
For me this has been a wonderful decade, because I really feel at home here. I love saying that we are a “Technion family” – my father is a Technion graduate and a professor in the PhysicsDepartment, my mother earned her M.Ed. in science education at the Technion, my older sister did her B.A. and M.A. here, and my husband completed his Ph.D. in Computer Science at the Technion last year. I also have a younger sister who is studying graphic design in Holon. I have a wonderful dynamic with Amnon – we even perform together – and I have a great relationship with the rest of the faculty, acceptance, understanding and generous economic support.
Renana Gershoni Poranne lives in Kiryat Tivon with her husband and their two children. She was born in Kibbutz Ramot Menashe, but moved with her family to junior faculty housing on the Technion campus when she was three months old. Several years later her family traveled abroad (her father’s post-doctoral work), and when she returned to Israel, she settled in Tivon. Renana graduated from Ort Greenberg High School in Tivon, with extra credits in physics, chemistry, math and English, of course, but also with external matriculation credits in singing. “I studied classical singing from age 13, first at the conservatory in Tivon, and then I sang with the IDF choir during my army service. Even now, I haven’t given up singing.
Renana’s B.Sc. included a research project with Prof. Ehud Keinan, who later advised her on her M.Sc. project, too. “Following the completion of my M.Sc., I decided to expand my research to include computational studies, because I find them more challenging to me than pure synthesis.” Thus she began working with Prof. Amnon Stanger, also from the Schulich Faculty of Chemistry, and embarked on her Ph.D. thesis. “My situation is quite exceptional, as I am the only student in my project, which is rare in organic chemistry studies. Although I miss the group dynamics sometimes, I enjoy an excellent relationship with my advisor, and have learned much from working alongside him and from the independence he gives me. About a year ago a post-doctoral student named Anuja joined the project, and she has a background in programming. She helps me a lot with technical problems. Based on the findings of Amnon’s previous research projects and our joint projects, Anuja and Amnon wrote an automated (and free) computer program that provides users with a simple way to implement our methodologies.”
Was giving up a musical career painful?
I am at peace with that decision. I have no doubt that I made the right choice for me, and this also concurred with the advice I received from my music teacher about making music an enjoyable hobby rather than a source of income. I chose an academic career because I felt that this is the place to advance using my intellect. Here there is a direct yield on the investment – particularly in the B.Sc. studies. In addition, I felt I could combine music with my research career, but not the opposite, and the thought of giving up the intellectual challenge was even more painful. In any case, you will always hear music playing on the speakers in my office.
What is your continuing involvement in the music world?
Twice a month I go to Tel Aviv for a music lesson, and at the Technion I perform at ceremonies, usually singing solo. These ceremonies, produced by Dalit Yaron of the Public Relations department, often take me away from classical music, my comfort zone, and force me to experience new things. This year I also began to appear with a pianist in the Haifa area and the surrounding Krayot region, in varied programs that include classical music as well as Hebrew and light American music.
Let’s return to science. What are you researching?
Aromatic systems and the production (synthesis) of new aromatic substances.
So you produce perfumes and air fresheners?
No. Aromatic does not mean fragrant. Aromaticity is the property of compounds with cyclically conjugated bonds and which have an interesting variety of physical properties such as light absorption and electrical conductivity. When such substances are put in a magnetic field, induced ring currents develop, and these are the focus of my current research. At present there is no precise qualitative definition for aromaticity, and compounds are usually compared to benzene, which is the “king” of aromatics, but even in comparisons to it we have no precise quantitative scale.
Can you give a few examples of aromatic substances?
Aromatic substances, or substances that contain aromatic groups, are everywhere. In nature we find them in DNA, in proteins and in enzymes. In the hemoglobin in our blood, for example, there is an aromatic group, which is responsible for binding the iron to which oxygen binds, and without which we could not live. In industry, compounds with aromatic groups are used in solar panels, LED lights, transistors and as pigments. Thus these substances have important applications
Does this mean you are involved in applied research?
No. I work in fundamental research. This is what interests me, and I believe this type of research is what leads to applied and theoretical breakthroughs. For example, the scientists who invented NMR (nuclear magnetic resonance) never thought that one day it would be used for body scans (MRI), and the researchers who invented optic fibers never dreamed that one day they would be an essential part of Internet infrastructure. To be exact, they never even knew that one day there would be such a thing as Internet.
But why not research a specific application?
First of all, because I think that we, as researchers, should focus on understanding the world around us. Of course that understanding can lead to the development of new technologies, but fundamental understanding should be our first priority. Second, researching a specific application limits the directions of the research, which depend on the purpose of the predefined final application: a new type of light bulb, a kind of steel with specific properties, etc. When you conduct fundamental research, the research itself leads you in different directions, some of which have applications. Of course I don’t discount applied research in industry, but academia should, in my opinion, focus on fundamental research.
What exactly do you do as a “fundamental scientist?”
Our group is researching aromatic molecules in two ways – computational and experimental. In our experiments we design new materials that will have specific physical properties such as light absorption or electrical conductivity. The computation aspect of the research involves developing new formulas for identifying and assessing aromaticity. In simple terms, we use programs that calculate (approximately!) the wave function using quantum mechanical methods. These calculations provide us with information on a molecule’s properties: geometry, energy, charge density, chemical shift, etc., and based on this information we can estimate the magnetic field that the induced ring currents create around the molecule, search for correlations between this field and the other properties and build aromaticity scales for substances from various families.
Do you already have results?
We recently discovered a correlation between the intensity of the ring currents in a molecule and the stability of the compound in two different families of molecules. We figure that in those families, the stronger the ring currents, the more stable – less reactive – the molecule. In addition, we have developed methodologies for identifying ring currents in complex systems. This method is very valuable, as the compounds are used widely in industry, and being able to predict their physical properties will make it possible to design molecules for specific purposes and will save a lot of resources.
What are your plans for the future?
I probably won’t look for a job in industry. At the moment I am gearing towards the next step: a post-doc abroad. When I return I will gladly join a university program as an independent researcher or to provide computation services – a field that is developing all over the world.
Of course I will always be happy to continue teaching chemistry at the university level. Whatever happens, it is very important to me that any path I choose allows me to focus on my family and continue with my music.
“It is important to me that any path I choose allows me to focus on my family and continue with my music.” Renana Gershoni Poranne
Benzene molecule with the “sensor atoms” that are used for calculating the magnetic field.
Molecule from the phenylenes family and the ring currents calculated for them.
Women’s Day at the Technion’s Faculty of Mechanical Engineering
“The more women there are who join the scientific-technological fields, the greater the interface between engineering and life, such that women will find it easier to combine family life, research challenges, gratifying careers and a good livelihood,” said Dr. Tamar Yarom, to participants in the Women’s Day event held at the Technion’s Faculty of Mechanical Engineering. Dr. Yarom, a faculty alumnus, is the director of R&D at the Manor Advanced Defense Technologies Division at Rafael Advanced Defense Systems Ltd. and a recent winner of the Israel Employee award. In her lecture, Yarom encouraged her audience to study mechanical engineering at the Technion, adding, “I do not believe in affirmative action; tell yourselves that you are just as good as the male students, and even better, and don’t hold yourselves back because of the environment.”
This was the fifth annual Women’s Day event held at the Technion’s Faculty of Mechanical Engineering. The organizers aim to increase awareness of the field’s importance among female high school students in the science-technology study track, who are candidates for studies at the Technion. During the event, the students were presented with a survey of mechanical engineering as a profession in knowledge-intensive industries and in academia, and with information on studying mechanical engineering at the Technion as a springboard to a career in this field.
The event was held in cooperation with the Haifa Municipality’s Excellence for Science program and the Nitzanei Technion program, which promotes excellence in the Druze sector. In attendance were some 200 female high school students in grades 11 and 12 who are studying in the science-technology track and young female Technion students in the pre-academic preparatory program as well as current Mechanical Engineering students.
The day was divided into two sessions, during which the participants heard lectures by faculty alumni who became senior engineers in Israeli industries and took tours of the faculty’s labs, which display technological developments and trailblazing research.
Prof. Yoram Halevy, the dean of the engineering faculty, greeted the students, saying, “We want to accept the best students to the faculty. There are many talented women who in the past did not find their way to this faculty or to the Technion. From the data I have obtained, I can tell you that the average grade scores of the women students in this faculty are higher than those of the men students. Mechanical engineering is a very broad and varied field, and I hope that your exposure to this variety today at the faculty will lead to your joining us. We will welcome you with open arms.”
“I welcome you on behalf of all the women at the Technion,” Israel Prize laureate Prof. Miriam Erez told the students. Erez is in charge of the status of women at the Technion. “At the Technion we are making good progress toward a greater presence of women on campus, and women account for 40% of the new students enrolled here this year. Unfortunately, the percentage of women in the Israeli high-tech sector is still low, but the Technion is continuously changing and with it the variety of fields of study. I hope you will choose to join the Technion. This is a decision that will be for your own benefit and the benefit of Israeli society as a whole.”
“I have always loved taking things apart and putting things together,” said Yael Shiloah, an alumnus of the faculty who now heads a development team at Intel Haifa. “I like practical studies more than theory, so I decided to learn mechanical engineering. It’s hard to tell what the future will bring, but if you learn at the Technion you will be part of the industry that will create the future. Mechanical engineering is a wonderful foundation for integrating into the technology world.”
The event was sponsored by Intel Israel and Motorola Solutions Israel, which donated scholarships to women students who began their studies in the faculty in 2014.
The Eyelid Motion Monitor (EMM) developed at Technion’s Faculty of Electrical Engineering has entered the clinical trials phase. The goal: to be used in the diagnosis of different diseases based on eyelid movement
The Eyelid Motor Monitor (EMM) has achieved another milestone: a prototype of the EMM device, developed at Technion’s Faculty of Electrical Engineering, is in the infant stages of clinical trials on human subjects at the Emek Medical Center, after receiving the ethics committee approval.
This remarkable project was developed by doctoral student Adi Hanuka, who began to work on it during her undergrad degree. She is currently a doctoral student at the Faculty of Electrical Engineering supervised by Prof. Levi Schachter. As part of her studies, she mentors electrical engineering students Alon Berger and Maor Itzhak in advancing the project. Already in its development phase, the project won several international awards, and recently won the top 20 teams at the international Texas Instruments Innovation Challenge Contest.
“Eyelid motion provides us with meaningful information about the health status of a patient,” explains Hanuka. “It can indicate, for example, neurological diseases such as Parkinson’s disease and autoimmune diseases such as Graves’ disease. At the request of Dr. Daniel Briscoe, Chairman of the Department of Ophthalmology at the Emek Medical Center, we developed a device that can be installed on standard refraction glasses used in eye tests.”
Both hardware and software systems are installed on these glasses to detect the wearer’s eyelid movements, and interpret them according to the magnetic field generated by two tiny magnets fitted on the upper eyelids. The EMM project is conducted at the High Speed Digital Systems Laboratory (HS-DSL) located in the Faculty of Electrical Engineering; the software (Eyelidpro) was developed by two electrical engineering students.
Adi Hanuka was born in the city of Nesher in 1987. She served in the Intelligence Corps in the IDF, achieving the rank of officer. She completed her undergraduate degree at the Technion within the framework of the Technion Excellence Program, and graduated with exceptionally high grades. Hanuka is also a graduate of the first cohort of the EE-EMET Program (an excellence program teaching technological and scientific knowledge in the areas of electronics, computers and communication run by the Faculty of Electrical Engineering).
Today, as part of her doctorate with Prof. Schachter, she is developing tiny optical radiation devices for cancer therapy. “Existing devices operate on energy from big and expensive accelerators, and this radiation also damages healthy tissue. Our vision is to develop a compact accelerator that would be relatively inexpensive and which could be employed also in small clinics, with a capacity for direct targeted radiation to the tumor site.”
In her spare time – which is hard to imagine she has any of – she plays the organ and up until recently she even studied Hindi (one of India’s official languages) and played on the Technion’s rugby team (until she suffered an injury). She is also a co-founder and member of the BeChen Program (Hebrew acronym for ‘Girls meet at EE’), with Prof. Lihi Zelnik-Manor, a faculty member of the Faculty of Electrical Engineering (EE). BeChen brings together female students at the EE department in order to strengthen their sense of belonging and increase their confidence when moving on to advanced studies or turning to work in the industry. Hanuka also recently won the Ariane de Rothschild Women Doctoral Program funded by the Rothschild-Caesarea Foundation. The foundation promotes equal opportunities for women; in Israel it works towards the advancement of women in Israeli academia, specifically in fields where there is a low number of female doctoral students.
In July 2015, Hanuka will represent Israel at the Lindau Nobel Laureate Meeting held annually in Germany, a globally recognized forum for the transfer of knowledge between Nobel laureates and young scientists. The conference this year, which focuses on the topic of interdisciplinary research, will be attended by 70 Nobel laureates from the fields of physics, chemistry and physiology or medicine – among them Prof. Dan Shechtman, Prof. Aaron Ciechanover and Prof. Ada Yonath.
