The Technion Faculty of Mechanical Engineering presented 18 new projects at its annual Design Expo. The exhibition featured projects developed by (fourth year) students at the faculty, in cooperation with the Faculty of Industrial Engineering and Management. The three outstanding teams won prizes awarded by Technion Vice President Prof. Moshe Sidi.<\/p>\n
First prize\u00a0went to\u00a0students Ziv Sela, Dror Avitan and Oron Shinar, who built a dedicated load release device for a tiny submarine, under the guidance of Giora Gorali. The device is designed for the discharging a load from an autonomous submarine developed at the Technion. The load, which is placed in a defined location on the seabed, can be used for various purposes. The student project included a stabilization system for the load on the ground and an emission chamber including doors, buoyancy tanks and more. \u201cThe main problem was the balance of the submarine after launching the load,\u201d explains student Ziv Sela, \u201cand this required a lot of investment and complicated calculations.\u201d<\/p>\n
Second prize was won by students Guy Dahan, Dor Haddad and Rafael Tebeka, for the development of a device for lifting rebars and inserting them into a mold of hoops before pouring concrete, under the guidance of Dr. Zvi Fruchter. The device is designed to replace the construction workers who lift and insert the long heavy rebars used for reinforcing concrete. \u201cToday, it takes two or three laborers to do the job,\u201d said Dor Haddad, \u201cand the goal of the project was to relieve them of the load. The planning was carried out in accordance with requirements defined by Hod Assaf Industries Ltd, and I believe that the device will be used by the company.\u201d<\/p>\n
Third prize was awarded for a device for practicing walking, intended for children with motor disabilities and developed by students Tom Beatty, Eli Filashtinski and Alex Shishko, under the guidance of Kfir Cohen and in cooperation with Ofakim School in Haifa. The device, intended for children with motor disabilities at a various functional levels, enables them to practice walking movements while bearing maximum weight on their lower limbs. The device moves the child from a lying-down position to a standing position and, for children with low motor functioning, it can simulate actual walking, thereby teaching the body what walking is and which muscles it should use. The device will be used at Ofakim School.<\/p>\n
Another interesting project revealed at the exhibition was the TELE-CARE robot, a robot for assisting independent senior citizens who live at home. (The project is a joint project of the Faculty of Mechanical Engineering and the Faculty of Computer Science). \u201cThe robot enables the operator to communicate with the elder, with the tablet mounted on the robot serving as his eyes and ears.\u201d Student Sergei Botner related, \u201cin the future, the robot will enable the doctor to maintain daily contact with the elder at home, to make sure everything is all right with him, take his blood pressure remotely and remind him to take his pills.\u201d<\/p>\n
The Design expo at the Faculty of Mechanical Engineering was held as part of a \u201cnew product design project\u201d led by Dr. Hagay Bamberger under the guidance of Prof. Reuven Katz, Head of the Design, Manufacturing and CAD track at the Faculty. The companies that took part in the course include Rafael, Israel Aerospace Industries, Elbit, Iscar, Hod Assaf Industries, Unilever, Vargus, Taro and Phoenicia. The course instructors who supervised the students during the development process were: Dr. Yehuda Rosenberg, Dr. Zvi Fruchter, Dubi Zuk, Giora Gorali, Dr. Yoram Kirzon, Kfir Cohen, Avraham Grinblat, Shlomo Nezer, Nimrod Meller, Dr. Avner Ronen Dr. Essam Totry, Professor Steven (Haim) Frankel and Yair Cizling.<\/p>\n
Other projects\u00a0on display\u00a0included a device for relief of forearm tremors in patients with Parkinson\u2019s disease by means of a unique stainless steel bracelet; a glass temperature-measuring device; a wing spreading device and, of course, the third Formula One car manufactured at the Technion for the FSAE Championship in Italy. The car is designed and manufactured by a team of 57 students, led by student Evgeny Guy. This year many innovations have been introduced in the car, including a helmet that displays the data right before the driver\u2019s eyes (like the display on fighter planes), a 15% reduction in the vehicle\u2019s weight, improved aerodynamics and an acceleration sensor combined with a gyroscope.<\/p>\n
\u201cThe students went through a process of product development from the initial concept stage to its realization and presentation at the exhibition,\u201d said Dr. Hagay Bamberger, who teaches the course. \u201cThere is nothing more exciting than exhibiting something that you made yourself, and the students learned a lot during the process. After much deliberation, we decided to award the first prize to the members of the team that developed the dedicated load release device for a tiny submarine, because they dealt with complex technical challenges and with requirements that changed during the course of the project, and they eventually developed a product that included original solutions.\u201d<\/p>\n
The event was also attended by Senior Vice President Prof. Moshe Sidi and Dean of the Faculty of Mechanical Engineering Prof. Yoram Halevy. \u00a0Prof. Sidi said at the event that \u201cthis multidisciplinary cooperation is also excellent preparation for the real world, where multidisciplinary cooperation is essential in almost every sector. One day, when you supervise the management of a major project of national importance, or when work hard on the development of a product that will totally change the lives of millions, remember where it all began.\u201d<\/p>\n","protected":false},"excerpt":{"rendered":"